| 规格:10寸 | 材质:阻燃ABS合金 |
| 工艺:注塑/注射 | 适用范围:通信机房 |
特点characteristic
采用工程塑料阻燃ABS，表面光滑，使光纤自然平铺，走线规则有序；
采用封闭式槽道，重量轻，具有较高的冲击韧性和良好的机械性能，保护光纤不受损伤；
出口位置灵活，能满足各种地方出纤的需要，出纤口波纹管保护光纤；
三通、四通接头，及各种弯头，满足各种走线需求，灵活配置；
标准化模块设计，安装方便，结构紧凑，槽道连接可靠，可以上固定，也可下固定；
走线架和走线槽道整体设计，布局合理，外形统一，美观整齐。
Closed raceway protects optical fiber，made in anti-flaming engineering plastic with light weight, high impact toughness and good mechanical properties.
It can be mounted easily with T joint, cross joint, various elbows, flexible exit and corrugated pipe, etc.
订货指南Order guide
测绘surveying and mapping
测量待装机房光纤传输设备的位置 Measuring the position of optical equipment.
根据光纤设备的位置和数量以及走线架的高度和间距，确定出口的形式和数量 The form and quantity of exits is determined by the position and number of optical equipments and the height and spacing of wiring rack.
根据光纤槽道的路径，确定零部件的数量 The number of all sorts of parts is determined by the path of optical fiber raceway.
根据走线架，确定支撑件 Supports is determined by wiring rack
与客户沟通 Communication with customer
确定光纤槽道的路径 Determine the path of optical fiber raceway.
确定将来是否扩容 Determine if expansion in the future
现场勘测，确定方案，给出配置并报价 Field investigation, determine the scheme, configuration and quotation
