能品汇

￥1480.00

空气压缩机油 压缩机油 嘉实多空气压缩机油 嘉实多CASTROL MOLUB ALLOYA GP30空气压缩机油

  • 服务

    广东 · 预售，付款后7天内

    • CASTROL MOLUB ALLOYA GP30

    MOLUB-ALLOYa GP 30

    Please See Reverse Side For Typical Properties
    PDS 404-10 6/97

    Molub-Alloy GP Oils are multiservice lubricants in six ISO viscosity grades. Their high performance is intended
    to produce cost savings in the broadest range of industrial applications.
    Accounting for potential savings in maintenance costs is the excellent film strength of the base oils plus the
    load-carrying/antiwear characteristics attributed to the Molub-Alloy lubricating solids in stable suspension. Builtin stability and potentially lower operating temperatures can offer additional savings in extending lubrication
    cycles and oil change intervals in reservoirs and circulation systems.
    Critical among the diverse needs to general plant lubrication is the continuous and often severe service in air
    compressors. Molub-Alloy GP Oils, in the appropriate viscosity grades, possess those characteristics essential to
    clean and safe compressor operation.
    DESCRIPTION
    Molub-Alloy GP Oils are manufactured from
    petroleum base oils selected to meet the most critical
    requirements of industrial applications. including
    excellent viscosity-pressure (load) relationship and a
    low residual carbon content.
    Metallic lubricating solids that have a natural affinity
    for metal surfaces and are of select grade and size
    are specially treated to remain effectively dispersed
    throughout the extended life of the oil.
    These oils are additionally compounded to inhibit
    oxidation and to protect against rust and corrosion.
    GP Oils are further inhibited against foaming.
    Molub-Alloy GP Oils are part of Castrol Performance
    Lubricants’ Eco-SolutionsTM product offering.
    Formulated to address environmental concerns, they
    are free of lead, chlorinated solvents, barium,
    antimony, zinc, and contain less than 2 ppm phenol.
    APPLICATION
    Molub-Alloy GP Oils are for use in a broad range of
    industrial applications including machine tools,
    circulation systems, and gear boxes where non-EP
    gear oils are specified (see Notes).
    Industries with many machine tools find lubricant
    consolidation saves in inventory costs and reduces
    errors in application. The stability built into GP Oils
    can, in many cases, extend reservoir change intervals
    and reduce consumption in all-loss applications.
    Molub-Alloy lubricating solids provide additional safety
    in extending intermittent applications.
    Appropriate viscosities of GP Oils are particularly
    suited to air compressor operation. Not only is their
    potential for carbonaceous deposits negligible, but
    they protect against cylinder wear with minimal
    applications of oil.
    ADVANTAGES
    Multiservice lubricating oils for general industry make
    inventory reduction cost savings possible.
    Additional wear protection of lubricating solids can
    extend the service life of machines. Lower friction,
    reduced heat generation, and energy savings are also
    made possible by lubricating solids, particularly with
    frequent start-up, slow speeds, and where high and
    unexpected loads are encountered.
    Compressors operate more cleanly and safely. GP
    Oils reduce carbon deposits which can be a source of
    compressor fires and explosions.
    Overall savings are derived from the above and result
    from less labor and downtime, smoother, more
    efficient operation, with longer parts life and extended
    lubrication cycles.
    NOTES
    Molub-Alloy GP Oils should not be used in conjunction
    with diatomaceous earth or any adsorbent, active-type
    filters. Size filters need only their recommended
    inspection and service.
    When changing over from conventional oils to GP
    Oils, a thorough cleanout of any carbonaceous
    deposits is recommended. Natural dispersency in
    Molub-Alloy products has been seen to free such
    deposits even on compressor valves. In circulation
    systems and reservoirs, this dispersency might require
    early attention to filters.
    Molub-Alloy GP Oils are not rated as extreme
    pressure (EP) or as compounded gear oils according
    to AGMA Classifications.
    Product Data Sheet

    • 起订：1
    • 供应：200
    • 发货：7天内
    公司:深圳市好润莱贸易有限公司
    状态:离线 发送信件 在线交谈
    姓名:熊良生(先生)
    电话:0755-29363102
    手机:18124192793
    地区:广东
    地址:中国广东省深圳市宝安区 深圳市龙华大浪街道高峰社区上早新村A58栋